On Sale! JDSU Test-Um TP650 Testifier PRO All Cable Tester – AAATesters.com

Click for Product Info and Updated Pricing

JDSU / Test-Um TP650 Cable Verifiers/Scanners

JDSU Testifier PRO TP-650 All-Cable Tester

Ideal for installation, troubleshooting, and maintenance on telco, network, or coax cable!

Identify up to 20 telco, network, or coax cable runs at a time

Cable test, length measurement, and hub blink functions in one unit.

Includes Original Factory Case And Accessories As Listed!

TP 650

JDSU TP650 TP-650 Testifier Pro All Cable Tester Models On Sale Warranty Calibration Backed by The Best Service and Lowest Prices in the Industry.

TestifierPRO

Key Features
– Identifies cable termination on active ports by blinking port LED
– Measures cable length using patented cable capacitance method
– Displays single-ended test results in wiremap format for opens, shorts, and split pairs
– Tests and displays in wiremap format shorts, opens, miswires, reversals, and split pairs with remotes
– Two-line, 16-character, back-lit, full alphanumeric LCD with icon flags
– Auto-off and timed backlight in any mode for low power consumption and long battery life

JDSU / Test-Um TP650

The TestifierPRO™ Cable Tester provides telecom, datacom, and cable installers and technicians with cable test, length measurement, and hub blink functions in one unit. The easy-to-use TestifierPRO cable tester requires one-button operation to initiate telco, network, and coax modes for diagnostic tests and results. The main unit includes built-in RJ11 and RJ45 jacks for testing six-wire and eight-wire twisted pair and F-connector for testing coax. An integrated remote bay houses a detachable test remote with built-in jacks for testing twisted pair cable terminated with RJ11 or RJ45 connectors.

The field-proven TestifierPRO performs detailed analysis to detect miswire, no connection, short, high-resistance fault, and split pair conditions when used with remote identifiers. It also tests and reports on shorts, opens, and split pairs conducted without a remote. The MAP ID function identifies multiple cables by displaying ID numbers of map-only remotes. TestifierPRO cable tester measures cable length and displays PASS icon for correctly wired T568A/B and six-pin cable. Tone generator mode sends any of four user-selectable tones on all pin and pair combinations.

Applications
– Installation, troubleshooting, and maintenance on telco, network, or coax cable
– Identify switch port LED where network cable is terminated
– Measure cable length
– Determine wiring condition
– Identify up to 20 telco, network, or coax cable runs at a time
– Find and fix position of exposed or hidden cable

TP650

Specification

Physical
Size
Excluding F-connector  3.3 x 6.7 x 15.7 cm
(1.3 x 2.6 x 6.2 in)
Including F-connector 3.3 x 6.7 x 16.8 cm
(1.3 x 2.6 x 6.6 in)
Weight 235.3 g (8.3 oz) with battery and remote
Environmental
Operating temperature  0 to 50° C (32 to 122° F)
Storage temperature –10 to 60° C (14 to 140° F)
Humidity   10 to 90%, non-condensing
Electrical Battery life (based on a typical 9 V Alkaline battery) is for
the full capacity of the battery used continuously in one of the
following modes (battery not included):
– Standby 2.5 yrs
– Cable testing 80 hrs (with backlight off)
General
Cable Types Shielded or unshielded twisted pair and coax
MinimumCable Length for Testing for Split Pairs 0.91 m (3 ft)
MinimumCable Length for PRETEST 1.22 m (4 ft)
LengthMeasurement Range CAT5/6 0 to 610 meters (0 to 2,000 feet)
Coax Cable 100Omaximum DC resistance, center conductor plus shield

Condition: Refurbished
Warranty: 90 Day Exchange

Included:
– JDSU Testifier PRO TP650 Cable Tester (BC# 11371)
– JDSU Testifier PRO Remote
– (2) Cat 5e Patch Cables
– RJ45 To Dual Clip Cable
– Cable Identifier
– Hard Copy User Manual
– Case For Unit
– Original Factory Case

Buy, Sell, New, Used, JDSU / Test-Um TP650

JDSU Test-Um TP650 Spec Sheet